beautypg.com

1 built-in commands, 1 built-in commands -72 – Cabletron Systems 2M46-04R User Manual

Page 120

background image

Chapter 5: Local Management

5-72

2M46-04R/2M46-04RDC User’s Guide

The commands are presented in the following format:

command:

Syntax:

Shows the required command format. It
indicates where arguments, if any, must be
specified.

Description:

Briefly describes the command and its uses.

Options:

Lists any additional fields in the appropriate
format which may be added to the command.

Example:

Shows an example of the command.

5.22.1

Built-in Commands

The built-in commands listed in this section activate functions on the LM
managed device or devices being accessed through Network Tools.

arp:

Syntax:

arp [options]

Description:

The arp command provides access to the ARP
(Address Resolution Protocol) cache, enabling
you to view cache data, delete entries, or add a
static route. Super-user access is required to
delete an entry or add a static route.

NOTE

the

The conventions used in describing the commands in Network
Tools are as follows:

Arguments enclosed by [ ] are required.

Arguments enclosed by < > are optional.

In the following command examples, information entered by the
user is in shown in bold Helvetica font

.

To abort the output or interrupt a process, press the CONTROL
key and c key simultaneously, designated as ^C here.

This manual is related to the following products: