Cabletron Systems 2M46-04R - Manual (Page 119)

Network Tools
2M46-04R/2M46-04RDC User’s Guide 5-71
Figure 5-27 Network Tools Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are two categories of commands in the command set.
• Built-in Commands – Allow the user to access and manage network
devices. The commands are: arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft-reset, telnet, link_trap, and
atm_stp_state.
• Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
-> help
2251-75
netstat
show
soft-reset
defroute
ping
bridge
Commands Available to the User:
Built in Commands:
traceroute
arp
reset
Welcome to Network Tools
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help '.
->
link_trap telnet
atm_stp_state