1 using the clear counters command, 1 using the clear counters command -61 – Cabletron Systems 2M46-04R User Manual
Page 109
Switch Statistics Screen
2M46-04R/2M46-04RDC User’s Guide
5-61
Frames Txmtd (Read-Only)
Displays the number of frames transmitted by the interface since last
power-up or reset.
Frames Fltrd (Read-Only)
Displays the number of frames filtered by the interface since last
power-up or reset.
Frames Frwded (Read-Only)
Displays the number of frames forwarded by the interface.
CLEAR COUNTERS (Command)
This command clears all the counters of the interfaces displayed to zero.
For details on how to use this field, refer to
5.19.1
Using the Clear Counters Command
To reset all the statistic counters to zero, perform the following steps:
1.
Use the arrow keys to highlight the CLEAR COUNTERS field at the
bottom of the screen.
2.
Press ENTER, and the counters for the selected interface are reset to
zero.