Rice Lake Static Weighing - Manual (Page 56)

52 CW-90/90X Checkweigher
REG.ZTARE Remove tare on ZERO NO, YES
REG.RTARE Round push button tare to nearest
display division NO, YES
REG.MOTWGH Allow weighment in motion NO, YES
REG.OVRBASE Zero base for overload calculation CALIB ZERO, SCALE ZERO
REG.PRTMOT Allow print while in motion NO, YES
REG.PRINTPT Add PT to keyed tare print NO, YES
REG.PRTHLD Print during display hold NO, YES
REG.SNPSHOT Display or Scale weight source DISPLAY, SCALE
REGWORD Regulatory word GROSS, BRUTTO
SD Set date MMDDYY, DDMMYY, YYMMDD, or YYDDMM. Enter six-digit
date using the year-month-day order specified for the
DATEFMT parameter, using only the last two digits of the year.
ST Set time hhmm (enter using 24-hour format)
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
ZERONLY Disable all keys except ZERO OFF, ON
Table 6-7. PFORMT Serial Commands
Command Description Values
GFMT.FMT Gross demand print format string See Section 7.0 on page 56 for information about demand print
format strings.
NFMT.FMT Net demand print format string
ACC.FMT Accumulator print format string
BUF.FMT Buffer print format string
STRM.FMT Streaming Format See Section 6.2 on page 53 for information about custom stream
formatting.
HDRFMT1 Header 1 Format Enter the data you want displayed in Header 1
HDRFMT2 Header 2 Format Enter the data you want displayed in Header 2
Table 6-8. DIG I/O Serial Commands
Command Description Values
DIO#b Digital input function OFF, ZERO, NT/GRS, TARE, UNITS, PRINT,
ACCUM, TIMDATE, ESC, CLEAR, DSPTAR,
IDKEY, KEY0–KEY9, KEYDP, ENTER, NAVUP,
NAVDN, NAVLFT, NAVRGT, KBDLOC, HOLD,
CLRCN, GROSS, NET, PRIM, SEC, CLRTAR,
CLRACC, TRIGGER
DIO#b Digital output function OVER, UNDER, ACCEPT, ZEROBD
DIO.TIMER#b Digital output timer function
DIO.TRIP#x Digital output trip functionality STABLE

FRERUN
Digital inputs and outputs are specified by bit number
Command Description Values
Table 6-6. FEATURE Serial Commands (Continued)