QOMO QRF700 User Manual - Manual (Page 16)

 Blue/Orange – indicates response signal received. The color is toggled
between blue and orange each time the answer is changed, the system will only
record the last response received before the test ends.
Tool Status Bar:
1. Control Buttons:
 Start/Pause – start or pause the timer
 Stop – stop the time
 Previous – return to the previous question page
 Next – advance to the next question page
 Exit – exit the current quiz session
 F1 –Controls the Register/Answering Status Bar size, by continuing to
press the button you will cycle the size from large to small and then it will
disappear.
 F2 –Controls the Register/Answering Status Bar position, by continuing
to press the button you will cycle the position from top, left and right.
 Report/ Result / Displays the instant report and result.(If
desired) Refer to session 2.1.1.7 Result and Report.
Note: All of these control buttons are duplicated and displayed on the instructor ’s remote
keypad.
2. The Question Answer Timer:
 The timeout value is selected for each question during the quiz file set up.
 The timer box background colors and functions are: Black: Stop ; Green:
Running ; Yellow: Pause .
 The left up/down button will reset the Minutes Press the up or down
button on the left side of the timer box to increase or decrease the Minute ’s.