QOMO QRF700 User Manual - Manual (Page 133)

keypad joined the
class previously.
back to previous class.
Display the register
screen.
9 The quiz is loaded and
running and the timer
started.
Yes Enter
and send
the
answer
Displays “Success!”
message.
Note: Before using your student keypad to join a quiz with the pace controlled by the
instructor, you should understand the function operation from using this table.
To join a quiz, follow these steps:
a) Turn on the keypad power. If the scenario is in form 5 or 8, you just need to press
the “Send” key
.
b) If you did not join the class previously, you may have to login to the current class
and register for the class.
c) If you joined the current class previously, you may simply press the “Send”
key to get a short cut to directly register for the class.
d) If your keypad ID is not listed in the current class, you may need to set your
keypad ID to the one listed in the class, or try to force a login. The instructor will
decide the permission of the participation.
e) After you registered the class, follow the instructor‟s quiz pace.

Attending a quiz with self controlled pace
Note: Before using your student keypad to join a quiz in the self controlled pace, you
should understand the function operation forms on the above table before you can begin
your quiz.
To join the quiz, follow these steps:
1. If you didn‟t join the class previously, you may have to login to the current class
and then register and join the class.
2. If you joined the current class previously, simply press the “Send” key to get
a short cut to directly register for the class.