Part 3, Hardware & system installation illustration, Student keypad – QOMO QRF700 User Manual User Manual
Page 117: Specifications, 1 student keypad 3.1.1 specifications
Part 3. Hardware & System Installation
Illustration
3.1 Student Keypad
3.1.1
Specifications
Dimensions (L× W× H): 4.5
‟‟ x 1.8‟‟x0.71
‟‟
Keys: 21
Power required: 2 AAA Batteries
RF transmission distance: ~200 feet
Battery life: Depends upon use or up to 6 months
Function: Transmit response signals
Note:
Each of the clickers is battery operational.
Insert two “AAA” batteries into the port on the
back of the clicker as indicated on the hardware. Slide the back plate into place. For a
more secure closure, use the screwdriver to insert the screw. The Screws and screwdriver
are provided for your convenience. Do not over tighten in order to avoid stripping the
screw. When the batteries have expired, remove the screw and back plate and replace
the batteries with fresh ones. Re-secure the back plate and screw, as necessary.
Enclosed in this package are the following items
Screwdriver
Screws