Crestron electronic DM-MD8X8 - Manual (Page 99)

Crestron DM-MD8X8 8x8 DigitalMedia™ Switcher
EDID Information
EDID Information
Manufacturer: SHP
Name: SHARP HDMI
Timing: 1920x1080 @ 60Hz
¾ Press the MENU button to return to the Loopback Settings.
• Press the MENU button to return to the list of options for the input card.
Restore Defaults Use the Restore Defaults function to reset the card to its factory settings. The cards
factory settings are:
• Loopback Deep Color Mode: 12 bit
• Color Space Mode: Force RGB
• Enable/Disable input: Input enabled
• Brightness level for inputs 1-4: 50%
• Contrast level for inputs 1-4: 50%
• Saturation level for inputs 1-4: 50%
• Hue level for inputs 1-4: 50%
To restore the card’s default settings:
• Turn the selection knob to highlight Restore Defaults and press the
ENTER button.
• Press the soft button labeled Yes to restore the default setting or press the
soft button labeled No to cancel and return to the list of options for the input
card.
Operations Guide – DOC. 6755A 8x8 DigitalMedia™ Switcher: DM-MD8X8
• 95