Crestron electronic DM-MD8X8 - Manual (Page 44)

8x8 DigitalMedia™ Switcher Crestron DM-MD8X8
Confirmation for HDCP Check
HDCP Check
The HDCP check will result
in all current routes being
cleared. Continue?
No Yes
Running an HDCP check will disconnect any audio and video routes that
are currently set. To proceed with the HDCP check, press the soft button
labeled Yes. To cancel the HDCP check, press the soft button labeled No.
Instructions for HDCP Check
HDCP Check
Please verify that all sources
and endpoints are powered
on before proceeding.
OK
• Verify that all source and display devices are powered on. Press the soft
button labeled OK to begin the HDCP check. A progress bar will be
displayed to show the progress of the HDCP check.
HDCP Check in Progress
HDCP Check
Test in Progress...
OK
• When the check is complete the results will be displayed.
40
• 8x8 DigitalMedia™ Switcher: DM-MD8X8
Operations Guide – DOC. 6755A