beautypg.com

Industry compliance, Crestron dm-md8x8 8x8 digitalmedia™ switcher – Crestron electronic DM-MD8X8 User Manual

Page 19

background image

Crestron DM-MD8X8

8x8 DigitalMedia™ Switcher

Connectors, Controls & Indicators (Continued)

#

CONNECTORS

1

,

CONTROLS &

INDICATORS

DESCRIPTION

19

100 – 240V ~ 4.0A

50/60 Hz

(1) IEC Socket, main power input; Mates with
removable power cord (included)

20

GROUND

(1) 6-32 screw, chassis ground lug

1. Interface connectors for DMNET and EIG ports are provided with the unit.

2. For external DMNet power, use Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply

as required.

Industry Compliance

This unit has been manufactured to comply with UL’s Standards for Safety in
Canada and the United States. Formal approval is pending.

As of the date of manufacture, the DM-MD8X8 has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.

NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

ƒ

Reorient or relocate the receiving antenna.

ƒ

Increase the separation between the equipment and receiver.

ƒ

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

ƒ

Consult the dealer or an experienced radio/TV technician for help.

Operations Guide – DOC. 6755A

8x8 DigitalMedia™ Switcher: DM-MD8X8

15