Crestron electronic DM-MD8X8 - Manual (Page 81)

Crestron DM-MD8X8 8x8 DigitalMedia™ Switcher
DMC-VID4
The front panel controls for the DMC-VID4 allow the user to rename the input and
view information on the incoming HDMI source.
DMC-VID4 Controls
1. DMC-VID4 Security c
Name:
Input Select
Input Rotate Rate
Using the DMC-VID4 controls, the user can:
• Change the input name.
• Select the input to be viewed.
• Select the input rotate rate.
• Adjust the input signals.
• View details on the signal delivered to the HDMI OUT (loopback) port.
• View details about the device connected to the HDMI OUT (loopback)
port.
• Restore the input name to its default setting.
Name/Rename the Input To name and/or rename the input:
• Turn the selection knob to highlight Name and press the ENTER button. A
cursor will appear next to the current name and controls for changing the
name will also be displayed. To cancel and return to the list of options for
the input card, press the MENU button.
Edit Input Name
Edit Input Name
Del < > Done
Security Camera s
Operations Guide – DOC. 6755A 8x8 DigitalMedia™ Switcher: DM-MD8X8
• 77