Crestron electronic DM-MD8X8 - Manual (Page 84)

8x8 DigitalMedia™ Switcher Crestron DM-MD8X8
Edit Input Name
Edit Input Name
Del < > Done
Front Doo r
¾ Select letters (upper and lower-case), numbers, or other characters by
turning the selection knob until the desired letter, number, or other
character is displayed on the LCD. Move the cursor to another position
by pressing the soft buttons labeled g and
h. To delete a character,
press the soft button marked Del.
NOTE: The maximum length for any input name is 32 characters.
¾ After the new name has been entered, press Done to save the name and
return to the list of selections for the video input.
Picture Controls:
Picture controls can be used to adjust the picture’s brightness, contrast,
saturation, and hue levels. To adjust the picture:
¾ Turn the selection knob to highlight Picture Controls and press the
ENTER button.
¾ Turn the selection knob to highlight the picture control to be adjusted
and press the ENTER button. Controls are available for brightness,
contrast, saturation, and hue.
Brightness Control
Input 1 Video Settings
Brightness 50%
80
• 8x8 DigitalMedia™ Switcher: DM-MD8X8
Operations Guide – DOC. 6755A