Crestron electronic DM-MD8X8 - Manual (Page 102)

8x8 DigitalMedia™ Switcher Crestron DM-MD8X8
information when highlighted with the selection knob and selected by
pressing the ENTER button.
• To exit and return to the list of available functions, press the MENU button.
Restore Defaults To restore the default settings of the output, turn the selection knob to highlight
Restore Defaults and press the ENTER button.
Press the soft button labeled Yes to restore the default settings or press the soft
button labeled No to cancel and return to the list of available functions.
If Yes is chosen, the settings will be restored as follows:
• Output 1 Deep Color Setting: 8 bit
• Output 2 Deep Color Setting (HDMI output on outputs 1, 3, 5 and 7): 12 bit
• DM Cable Type: DM Cable
• Maximum Pixel Rate on Output 1: 165
• Maximum Pixel Rate on Output 2 (HDMI output on outputs 1, 3, 5 and 7):
225
• Stream Name: Reverts to number of output. (i.e. The name assigned to
Stream 1 will be renamed “1”.)
98
• 8x8 DigitalMedia™ Switcher: DM-MD8X8
Operations Guide – DOC. 6755A