Crestron electronic DM-MD8X8 - Manual (Page 43)

Crestron DM-MD8X8 8x8 DigitalMedia™ Switcher
Message Log
Message Log
<< >>
System log:
• Press the soft buttons labeled gg and hh to display the data that does not
fit on the display.
• Turn the selection knob to scroll through the list of messages.
• Press the MENU button to return to Installer Tools.
Commission System
The Commission System section of Installer Tools is used to manage HDCP and
EDID capabilities of sources and displays connected to the DM-MD8X8.
Open Commission System To open the Commission System section of Installer Tools:
• Open Installer Tools as described on page 26.
• Turn the selection knob to highlight Commission System and press the
ENTER button. A list of functions will be displayed.
Commission System Functions
Commission System
HDCP Check
HDCP Check The switcher can test HDMI sources and displays for switching limitations due to
HDCP keys. The number of HDCP keys specify the number of display devices that
can be connected to a source over HDMI using HDCP authentication. To run an
HDCP check:
• Open the Commission System section as described on page 39.
• Turn the selection knob to highlight HDCP Check and press the ENTER
button.
Operations Guide – DOC. 6755A 8x8 DigitalMedia™ Switcher: DM-MD8X8
• 39