Dell PowerVault 132T LTO/SDLT (Tape Library) - Manual (Page 38)

then to accept the SCSI ID displayed
for Drive 1 and move to the next option.
Step 27 If Drive 1 is a fibre drive, press
and to set the ID for Drive 1.
For a fibre drive, you must choose a number
between 0-126.
Step 28 If you made changes, press
and then to accept the changes and
move to the next option. If you did not
make changes, press to go to the next
option.
Step 29 If Drive 2 is a fibre drive, press
and to set the ID for Drive 2.
For a fibre drive, you must choose a number
between 0-126.
Step 30 If you made changes, press
and then to accept the changes and
move to the next option. If you did not
make changes, press to go to the next
option.
Step 31 Press and to set the
Inquiry mode.
Sets the inquiry string returned to the host in a
SCSI inquiry command.
Available options are:
l PowerVault 132T
l PowerVault 136T
l Scalar 24
l Scalar 100
Step 32 Press and then to accept
the changes and move to the next option.
Step 33 Press and to set the
number of minutes for the Timeout value.
Sets the duration of inactivity on a submenu,
which will cause the menu to go back to the
Main screen.
The timeout window is represented in minutes.
You must specify a value between 1 and 9.
The default setting is 1 minute.
If you have a password set, after the timeout
window has expired, the password will need to
be re-entered to access the secure menu
features.
Step 34 Press and then to accept
the changes and move to the next option.
Step 35 Press and to
enable/disable a Password.
Available options are:
l on: the password is required to enter
any menu except Status
l off: password is disabled
Step 36 Press and then to accept
the changes and move to the next option.
Step 36 If you enabled a password, set
the password by pressing
and to
change the value of the current field and
and to move between fields. If you
did not enable a password, skip to Step
35.
The current field will be highlighted. You must
select a numeric value between 0 and 9 for all
four fields.
Step 37 Press and then to accept
the changes and move to the next option.
Step 38 Press and to
enable/disable Key Clicks.
Available options are:
l on: an audible tone will be heard when
buttons are pressed on the keypad
l off: key clicks disabled
Step 39 Press and then to accept