Dell PowerVault 132T LTO/SDLT (Tape Library) - Manual (Page 46)

Set Library SCSI ID
The SCSI ID of the library identifies which ID the library uses to communicate with the host.
Configure the User Interface
User Interface allows you to configure the LCD timeout, password, and key click settings.
Path:
Set Timeout
Timeout selects how long the library is available for operator menu selections before it automatically returns to the Main menu due to screen inactivity. It is
designed to provide you with security for your system.
then press .
Selection Description/Result
Step 1 From the Setup menu, highlight
and press .
Sets SCSI IDs.
Step 2 Highlight and press .
Sets the library SCSI ID. You must have at
least one partition set to Random mode to
use this option. See
Configure Modes for
more information.
Step 3 Press and to select the number
you would like to set for the library.
You must choose a number between 0 and
7. The default ID is 0.
Step 4 Press to highlight Run ( ) and
then press .
The library SCSI ID is set.
Step 5 A confirmation screen displays. Press
to dismiss.
Selection Description/Result
Step 1 From the Setup menu, highlight
and press .
Step 2 Highlight and press .
Sets timeout window.
Step 3 Press and to select the value
of the timeout window.
The timeout window is represented in
minutes. You must specify a value between 1
and 9.
The default setting is 1 minute.