Dell PowerVault 132T LTO/SDLT (Tape Library) - Manual (Page 71)

Exporting Log Files
Output Logs exports the log files to the serial port. If you are having problems with your library, you may be asked to output the logs and send them to
Technical Support to analyze.
Path:
Drive Power On/Off
Drive Power On/Off either prepares a drive to be removed or reactivates a drive once it is installed. If you are removing a drive, the drive will be taken offline
and will not be available for use.
Path:
Back to Contents Page
completion message is displayed. Press
to dismiss.
Selection Description/Result
Step 1 From the Tools menu, highlight
and press .
Outputs logs to the serial port.
Step 2 When the output is complete, a
completion message is displayed. Press
to dismiss.
Selection Description/Result
Step 1 From the Tools menu, highlight
and press .
Prepares a drive to be removed/replaced.
Step 2 Press and to select the drive
you wish to remove/replace.
Step 3 Press to highlight. Run ( ) and
then press .
The drive is ready to be removed/the new
drive can be used.