Dell PowerVault 132T LTO/SDLT (Tape Library) User Manual
Page 49
There are two methods for AutoClean: with a partitioned library and with an unpartitioned library.
Path:
AutoClean Unpartitioned Library
AutoClean Partitioned Library
Selection
Description/Result
Step 1 From the Setup Menu, highlight
and press
.
Configures automatic cleaning of drives.
Step 2 Press
and
to Enable/Disable
the autoclean function.
Available options are:
l
on: the library will automatically clean
the drives when cleaning is required.
Overall slots available for data
cartridges will be reduced. Host
software cleaning features MUST be
turned off.
l
off: disabled
Step 3 Press
to highlight Run (
) and
then press
.
AutoClean is configured.
Step 4 A confirmation screen displays. Press
to dismiss.
Selection
Description/Result
Step 1 From the Setup Menu, highlight
and press
.
Configures automatic cleaning of drives.
Step 2 Press
and
to select one of the
options.
Available options are:
l
P1 on P2 on: AutoClean is enabled for
both partitions
l
P1 on P2 off: AutoClean is enabled for
partition 1 only
l
P1 off P2 on: AutoClean is enabled for
partition 2 only
l
P1 off P2 off: AutoClean is disabled for
both partitions
Step 3 Press
to highlight Run (
) and
then press
.
AutoClean is configured.
Step 4 A confirmation screen displays. Press
to dismiss.