Dell PowerVault 132T LTO/SDLT (Tape Library) - Manual (Page 44)

Set Inquiry
Inquiry allows the host to see your library as another existing Dell product. This can be useful if the host software does not currently include drivers to
communicate with the library.
Access Mode
Access Mode allows you to set additional control paths, which allows the library to be controlled by more than one host. The library must be in LUN mode for
you to use this feature. This feature is not available for libraries with SDLT drives.
Step 6 Press to highlight Run ( ) and
then press .
The drive SCSI IDs are set.
Step 7 A confirmation screen displays. Press
to dismiss.
Selection Description/Result
Step 1 From the Setup menu, highlight
and press .
Step 2 Highlight and press .
Sets Inquiry string.
Step 3 Press and to select product
you would like your library to appear as to
the host.
Sets the inquiry string returned to the host
in a SCSI inquiry command.
Available options are:
l PowerVault 132T
l PowerVault 136T
l Scalar 24
l Scalar 100
Step 4 Press to highlight Run ( ) and
then press .
The inquiry string is set.
Step 5 A confirmation screen displays. Press
to dismiss.
Selection Description/Result
Step 1 From the Setup menu, highlight
and press .
Step 2 Highlight and press .
Sets Access mode.
Step 3 Press and to enable/disable
the Control Path Mode.
Enables or disables the selected Control
Path Mode.
Available options are:
l Enabled
l Disabled
The Access mode is set.