Dell PowerVault 132T LTO/SDLT (Tape Library) - Manual (Page 62)

Motion Counts displays how many times a slot or drive has had a cartridge placed in it or removed from it.
Path:
Display Retry Counts
Retry Counts displays the number of retry operations the picker has attempted to put a cartridge to a specific location or get a cartridge from a particular
location.
Path:
Selection Description/Result
Step 1 From the Status menu, highlight
and press .
Displays slot usage information.
Step 2 Press and to view the motion
counts for each slot.
Available options are:
l System Moves: displays the total
number of library moves. A move is
described as a "get" from one location
and a "put" to another location.
l Drive 1: displays the number of Gets
and Puts to and from Drive 1.
l Drive 2: displays the number of Gets
and Puts to and from Drive 2.
l IE and Slots 1 - 23 for LTO or 1- 20 for
SDLT: displays the total number of
moves for a particular slot.
The format of the entries is:
l P: = Number of “puts” to a location.
l G: = Number of “gets” from a location.
Step 3 To exit, press to highlight and
then press .
You are returned to the Status menu.
Selection Description/Result
Step 1 From the Status menu, highlight
and press .
Displays the number of retry operations.
Step 2 Press and to view all of the
retry counts.
Available options are:
l System: displays the total number of
library retries.
l D1: displays how many times a get or
a put retry has occurred for Drive 1.
l D2: displays how many times a get or
a put retry has occurred for Drive 2.
l Position: displays how many times the
picker has retried positioning.
l Scan: displays how many times the
barcode scanner has retried scanning
a bad label.
l IE and Slots 1- 23 for LTO or 1 - 20 for
SDLT-320: displays how many times a
get or a put retry has occurred for a
particular slot.