Dell POWEREDGE M905 - Manual (Page 775)

Router Discovery Protocol Commands 783
Router Discovery Protocol Commands
ip irdp
Use the ip irdp command in Interface Configuration mode to enable Router Discovery on an
interface. Use the no form of the command to disable Router Discovery.
Syntax
ip irdp
no ip irdp
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables router discovery on the selected interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp
ip irdp address
Use the ip irdp address command in Interface Configuration mode to configure the address that
the interface uses to send the router discovery advertisements. Use the no form of the command to
return the address to the default.