Dell POWEREDGE M905 - Manual (Page 569)

DHCP and BOOTP Relay Commands 569
Example
The following example defines a maximum hopcount of 6.
console(config)#bootpdhcprelay maxhopcount 6
bootpdhcprelay minwaittime
Use the bootpdhcprelay minwaittime command in Global Configuration mode to configure the
minimum wait time in seconds for BootP/DHCP Relay on the system. When the BOOTP relay
agent receives a BOOTREQUEST message, it might use the seconds-sinceclient- began-booting
field of the request as a factor in deciding whether to relay the request or not. Use the no form of
the command to set the minimum wait time to the default value.
Syntax
bootpdhcprelay minwaittiime integer
no bootpdhcprelay minwaittime
• integer—Minimum wait time for BootP/DHCP Relay on the system. (Range: 0-100
seconds)
Default Configuration
0 is the default integer configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a minimum wait time of 10 seconds.
console(config)#bootpdhcprelay minwaittime 10
bootpdhcprelay serverip
Use the bootpdhcprelay serverip command in Global Configuration mode to configure the server
IP address for BootP/DHCP Relay on the system. Use the no form of the command to set the IP
address to the default value. Use the no form of the command to return the server IP address to the
default value.
Syntax
bootpdhcprelay serverip ip-address
no bootpdhcprelay serverip