Dell POWEREDGE M905 - Manual (Page 452)

444 Port Channel Commands
www
.dell.com | support.dell.com
console(config-if-ch1)#hashing-mode 4
no hashing-mode
Use the no hashing-mode command to set the hashing algorithm on Trunk ports to the default (3).
Syntax Description
no hashing-mode
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel 1
console(config-if-ch1)#no hashing mode
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel information.
Syntax Description
show interfaces port-channel [port-channel number]
[port-channel-number]—Number of the port channel to show. This parameter is optional. If
the port channel number is not given, all the channel groups are
displayed. (Range: Valid port-channel number, 1 to 8)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.