Dell POWEREDGE M905 - Manual (Page 447)

SNMP Commands 439
snmp-server view
Use the snmp-server view command in Global Configuration mode to create or update a Simple
Network Management Protocol (SNMP) server view entry. To delete a specified SNMP server view
entry, use the no form of this command.
Syntax
snmp-server view view-name oid-tree { included | excluded }
no snmp-server view view-name [oid-tree ]
• view-name—Specifies the label for the view record that is being created or updated. The
name is used to reference the record. (Range: 1-30 characters.)
• oid-tree—Specifies the object identifier of the ASN.1 subtree to be included or excluded
from the view. To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4
, or a word, such as system. Replace a single subidentifier with the asterisk
(*) wildcard to specify a subtree family; for example 1.3.*.4.
• included—Indicates that the view type is included.
• excluded—Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
Examples
The following example creates a view that includes all objects in the MIB-II system group
except for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group.
console(config)# snmp-server view user-view system included
console(config)# snmp-server view user-view system.7 excluded
console(config)# snmp-server view user-view ifEntry.*.1 included
snmp-server v3-host
Use the snmp-server v3-host command in Global Configuration mode to specify the recipient of
Simple Network Management Protocol Version 3 notifications. To remove the specified host, use
the no form of this command.