Dell POWEREDGE M905 - Manual (Page 503)

Syslog Commands 497
Syntax
port port
no port
• port—The port number for syslog messages. (Range: 1-65535)
Default Configuration
The default port number is 514.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be
executed to set the port number for the server.
Example
The following example sets the syslog message port to 300.
console(config-logging)#port 300
show logging
Use the show logging command in Privileged EXEC mode to display the state of logging and the
syslog messages stored in the internal buffer.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the state of logging and the syslog messages stored in the
internal buffer.
console#show logging