Dell POWEREDGE M905 - Manual (Page 226)

198 IGMP Snooping Querier Commands
www
.dell.com | support.dell.com
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the querier timer expiry time to 1800 seconds.
console(config)#ip igmp snooping querier timer expiry 1800
ip igmp snooping querier version
This command sets the IGMP version of the query that the snooping switch is going to send
periodically. The no form of this command sets the IGMP Querier Version to its default value.
Syntax
ip igmp snooping querier version number
no ip igmp snooping querier version
• number—IGMP version. (Range: 1–2)
Default Configuration
The querier version default is 2.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the IGMP version of the querier to 1.
console(config)#ip igmp snooping querier version 1
ip igmp snooping querier election participate
This command enables the Snooping Querier to participate in the Querier Election process when
it discovers the presence of another Querier in the VLAN. When this mode is enabled, if the
Snooping Querier finds that the other Querier source address is more than the Snooping Querier
address, it stops sending periodic queries. If the Snooping Querier wins the election, then it