Dell POWEREDGE M905 - Manual (Page 137)

AAA Commands 103
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method for a console.
console(config)# line console
console(config-line)# login authentication default
password (Line Configuration)
Use the password command in Line Configuration mode to specify a password on a line. To remove
the password, use the no form of this command.
Syntax
password password [encrypted]
no password
• password—Password for this level. (Range: 8- 64 characters)
• encrypted—Encrypted password to be entered, copied from another switch
configuration.
Default Configuration
No password is specified.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies a password "mcmxxyyy" on a line.
console(config-line)# password mcmxxyyy