Dell POWEREDGE M905 - Manual (Page 578)

578 DHCPv6 Commands
www
.dell.com | support.dell.com
ipv6 dhcp server
Use the ipv6 dhcp server command in Interface Configuration mode to configure DHCPv6 server
functionality on an interface. For a particular interface DHCPv6 server and DHCPv6 relay
functions are mutually exclusive.
Syntax
ipv6 dhcp server pool-name [rapid-commit] [preference pref-value]
• pool-name—The name of the DHCPv6 pool containing stateless and/or prefix delegation
parameters
• rapid-commit—Is an option that allows for an abbreviated exchange between the client
and server.
• pref-value—Preference value - used by clients to determine preference between multiple
DHCPv6 servers. (Range: 0-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN, Tunnel) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures DHCPv6 server functionality.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 dhcp server pool
prefix-delegation
Use the prefix-delegation command in IPv6 DHCP Pool Configuration mode to define Multiple
IPv6 prefixes within a pool for distributing to specific DHCPv6 Prefix delegation clients.
Syntax
prefix-delegation prefix/prefixlength DUID [name hostname] [valid-lifetime valid-lifetime]
[preferred-lifetime preferred-lifetime]
no prefix-delegation prefix/prefixlength
• prefix/prefixlength—Delegated IPv6 prefix.