Dell POWEREDGE M905 - Manual (Page 314)

296 Line Commands
www
.dell.com | support.dell.com
history
Use the history command in Line Configuration mode to enable the command history function.
To disable the command history function, use the no form of this command.
Syntax
history
no history
Default Configuration
The default value for this command is enabled.
Command Mode
Line Interface mode
User Guidelines
This command has no user guidelines.
Example
The following example disables the command history function for the current terminal
session.
console(config-line)# no history
history size
Use the history size command in Line Configuration mode to change the command history buffer
size for a particular line. To reset the command history buffer size to the default setting, use the no
form of this command.
Syntax
history size number-of-commands
no history size
• number-of-commands—Specifies the number of commands the system may record in its
command history buffer. (Range: 0-216)
Default Configuration
The default command history buffer size is 10.
Command Mode
Line Configuration mode