Dell POWEREDGE M905 - Manual (Page 488)

482 SSH Commands
www
.dell.com | support.dell.com
ip ssh pubkey-auth
Use the ip ssh pubkey-auth command in Global Configuration mode to enable public key
authentication for incoming SSH sessions. To disable this function, use the no form of this
command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent from this configuration.
Example
The following example enables public key authentication for incoming SSH sessions.
console(config)#ip ssh pubkey-auth
ip ssh server
Use the ip ssh server command in Global Configuration mode to enable the switch to be
configured from SSH. To disable this function, use the no form of this command.
Syntax
ip ssh server
no ip ssh server
Default Configuration
This command is enabled by default.
Command Mode
Global Configuration mode
User Guidelines
To generate SSH server keys, use the commands crypto key generate rsa, and crypto key generate
dsa.