Show interfaces description – Dell POWEREDGE M905 User Manual
Page 192

160
Ethernet Configuration Commands
www
.dell.com | support.dell.com
show interfaces description
Use the show interfaces description command in User EXEC mode to display the description for
all configured interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number]
•
interface—Valid Ethernet port.
•
port-channel-number—A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for the interface 1/g1.
console>show interfaces description
Port Description
---- -----------------------------------------------------------
1/g1 Port that should be used for management only
2/g1
2/g2
Received Pause Frames
A count of MAC Control frames received with an opcode indicating the
PAUSE operation.
Transmitted Pause Frames
Counted MAC Control frames transmitted on this interface with an
opcode indicating the PAUSE operation.
Field
Description