Dell POWEREDGE M905 - Manual (Page 363)

Configuration and Image File Commands 349
duplex full
speed 1000
exit
interface ethernet 1/g2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000
exit
show startup-config
Use the show startup-config command in Privileged EXEC mode to display the startup
configuration file contents.
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the startup-config file.
console#show startup-config
software version 1.1
hostname device
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000