Dell POWEREDGE M905 - Manual (Page 151)

Address Table Commands 117
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows using this command in Ethernet Interface Configuration mode.
console(config-if-1/g3)# port security max 80
show bridge address-table
Use the show bridge address-table command in Privileged EXEC mode to display all entries in the
bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel
port-channel-number]
• vlan—Specific valid VLAN, such as VLAN 1.
• interface—A valid Ethernet port.
• port-channel-number—A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console#show bridge address-table
Aging time is 300 Sec
Vlan Mac Address Port Type
------- --------------- ----- -------------
1 0000.0001.0000 1/g1 Dynamic