Dell POWEREDGE M905 - Manual (Page 724)

730 OSPFv3 Commands
www
.dell.com | support.dell.com
Syntax
default-information originate [always] [metric integer] [metric-type {1 | 2}]
no default-information originate [metric] [metric-type]
• always — Always advertise default routes.
• integer — The metric (or preference) value of the default route. (Range: 0-16777214)
• 1—External type-1 route.
• 2—External type-2 route.
• metric — Specify the metric of the default route.
• metric-type — Specify metric-type of the default route.
Default Configuration
2 is the default value for metric-type.
Command Mode
Router OSPFv3 Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example controls the advertisement of default routes by defining a metric value
of 100 and metric type 2.
console(config)#ipv6 router ospf
console(config-rtr)#default-information originate metric 100
metric-type 2
default-metric
Use the default-metric command in Router OSPFv3 Configuration mode to set a default for the
metric of distributed routes.
Syntax
default-metric metric
no default-metric
• metric—Metric value used for distribution (Range: 1-16777214)
Default Configuration
This command has no default configuration.