Dell POWEREDGE M905 - Manual (Page 295)

System Management Commands 273
show system id
Use the show system id command in User EXEC mode to display the system identity information.
Syntax
show system id [unit]
• unit—The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
console>show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957
Unit Service tag Serial number Asset tag
----- ------------ -------------- -----------
1 89788978 8936589782 7843678957
2 4254675 3216523877 5621987728
show users
Use the show users command in Privileged EXEC mode to display information about the active
users.
Syntax
show users
Default Configuration
This command has no default configuration.