Dell POWEREDGE M905 - Manual (Page 390)

378 QoS Commands
www
.dell.com | support.dell.com
The following table lists the parameters in the example and gives a description of each.
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC mode to display the
current IP DSCP mapping to internal traffic classes for a specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Example
console#show classofservice ip-dscp-mapping
IP DSCP Traffic Class
------------- -------------
0(be/cs0) 1
1 1
2 1
3 1
4 1
5 1
6 1
Parameter Description
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the
user priority value is mapped.