Dell POWEREDGE M905 - Manual (Page 746)

752 OSPFv3 Commands
www
.dell.com | support.dell.com
Example
The following example displays the information in VLAN 11’s virtual interface tables.
console#show ipv6 ospf interface vlan 11
IP Address..................................... Err
ifIndex........................................ 1
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.0
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
Iftransit Delay Interval....................... 1
Authentication Type............................ None
Metric Cost.................................... 10 (computed)
OSPF Mtu-ignore................................ Disable
OSPF cannot be initialized on this interface.
show ipv6 ospf interface brief
Use the show ipv6 ospf interface brief command in Privileged EXEC mode to display brief
information for the IFO object or virtual interface tables.
Syntax
show ipv6 ospf interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.