Dell POWEREDGE M905 - Manual (Page 330)

312 IP Addressing Commands
www
.dell.com | support.dell.com
show ip interface management
Use the show ip interface management command in User EXEC mode to display the management
interface configuration.
Syntax
show ip interface management
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the management interface configuration.
console>show ip interface management
IP Address..................................... 10.240.4.125
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 10.240.4.1
Burned In MAC Address.......................... 00:10:18:82:04:35
Network Configuration Protocol Current......... None
Management VLAN ID............................. 1