Dell POWEREDGE M905 - Manual (Page 41)

Command Groups 3
Telnet Server Configures Telnet service on the switch and displays Telnet
information.
802.1x Configures and displays commands related to 802.1x security protocol.
Layer 3 Groups
ARP (IPv4) Manages Address Resolution Protocol functions.
DHCP and BOOTP Relay (IPv4) Manages DHCP/BOOTP operations on the system.
DHCPv6 (IPv6) Configures IPv6 DHCP functions.
DVMRP (Mcast) Configures DVMRP operations.
IGMP (Mcast) Configures IGMP operations.
IGMP Proxy (Mcast) Manages IGMP Proxy on the system.
IP Routing (IPv4) Configures IP routing and addressing.
IPv6 Routing (IPv6) Configures IPv6 routing and addressing.
Loopback Interface (IPv6) Manages Loopback configurations.
Multicast (Mcast) Manages Multicasting on the system.
OSPF (IPv4)_ Manages shortest path operations.
OSPFv3 (IPv6) Manages IPv6 shortest path operations.
PIM-DM (Mcast) Configures PIM-DM operations.
PIM-SM (Mcast) Configures PIM-SM operations.
Router Discovery Protocol (IPv4) Manages router discovery operations.
Routing Information Protocol
(IPv4) Configures RIP activities.
Tunnel Interface (IPv6) Managing tunneling operations.
Virtual LAN Routing (IPv4) Controls virtual LAN routing.
Virtual Router Redundancy
(IPv4) Manages router redundancy on the system.
Command Group Description