Dell POWEREDGE M905 - Manual (Page 644)

648 IPv6 Routing Commands
www
.dell.com | support.dell.com
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows the preference value associated with the type of route.
console#show ipv6 route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra..................................... 8
OSPF Inter..................................... 10
OSPF Ext T1.................................... 13
OSPF Ext T2.................................... 150
OSPF NSSA T1................................... 14
OSPF NSSA T2................................... 151
show ipv6 route summary
Use the show ipv6 route summary command in Privileged EXEC mode to display a summary of the
routing table. Use all to display the count summary for all routes, including best and non-best
routes. Use the command without parameters to display the count summary for only the best
routes.
Syntax
show ipv6 route summary [all]
• all—Displays the count summary for all routes.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.