Dell POWEREDGE M1000E - Manual (Page 618)

618 Fabric OS Administrator’s Guide
53-1002745-02
FIPS mode configuration
B
LDAP in FIPS mode
You can configure your Microsoft Active Directory server to use the Lightweight Directory Access
Protocol (LDAP) while in FIPS mode. There is no option provided on the switch to configure TLS
ciphers for LDAP in FIPS mode. However, the LDAP client checks if FIPS mode is set on the switch
and uses the FIPS-compliant TLS ciphers for LDAP. If the FIPS mode is not set and the Microsoft
Active Directory server is configured for FIPS ciphers, it uses FIPS-compliant ciphers.
Table 88 lists the differences between FIPS and non-FIPS modes of operation.
IPsec Usage of AES-XCBC, MD5, and DH group 1
are blocked. No restrictions
LDAP CA CA certificate must be available. CA certificate is optional.
Common certificate for FCAP and
HTTPS authentication Not supported Supported
Radius auth protocols PEAP-MSCHAPv2 CHAP, PAP, PEAP-MSCHAPv2
Root account Disabled Enabled
Secure RPC protocols TLS/AES128 cipher suite SSL and TLS – all cipher suites
Signed firmware download Mandatory firmware signature validation
(SCP only) Optional firmware signature
validation (FTP and SCP)
SNMP Read-only operations Read and write operations
SSH algorithms HMAC-SHA1 (mac)
3DES-CBC, AES128-CBC, AES192-CBC,
AES256-CBC (cipher suites) No restrictions
SSH public keys RSA 1024 bit keys and RSA 2048 bit keys RSA 1024 bit keys, RSA 2048
bit keys, and DSA 1024 bit keys
TACACS + authentication Not supported Supported
Telnet/SSH access Only SSH Telnet and SSH
TABLE 88 FIPS and non-FIPS modes of operation
FIPS mode non-FIPS mode
The certificate of the CA that issued the Microsoft Active
Directory server certificate must be installed on the switch. There is no mandatory CA certificate installation on
the switch.
Configure FIPS-compliant TLS ciphers [TDES-168, SHA1
and RSA-1024] on the Microsoft Active Directory server.
The host needs a reboot for the changes to take effect. On the Microsoft Active Directory server, there is no
configuration of the FIPS-compliant TLS ciphers.
The switch uses FIPS-compliant ciphers regardless of the
Microsoft Active Directory server configuration. If the
Microsoft Active Directory server is not configured for FIPS
ciphers, authentication will still succeed. The Microsoft Active Directory server certificate is
validated if the CA certificate is found on the switch.
The Microsoft Active Directory server certificate is validated
by the LDAP client. If the CA certificate is not present on the
switch then user authentication will fail. If the Microsoft Active Directory server is configured
for FIPS ciphers and the switch is in non-FIPS mode,
then user authentication will succeed.
TABLE 87 FIPS mode restrictions (Continued)
Features FIPS mode Non-FIPS mode