Dell POWEREDGE M1000E - Manual (Page 49)

Fabric OS Administrator’s Guide 49
53-1002745-02
Topology discovery
1
Number of Associated Node Names: 1
Associated Node Names:
10:00:00:60:69:20:15:75
Clearing the management server database
Use the following procedure to clear the management server database:
NOTE
The command msPlClearDB is allowed only in AD0 and AD255.
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the msplClearDb command.
3. Enter y to confirm the deletion.
The management server platform database is cleared.
Topology discovery
The topology discovery feature can be displayed, enabled, and disabled; it is disabled by default.
The commands mstdEnable and mstdDisable are allowed only in AD0 and AD255.
Displaying topology discovery status
Use the following procedure to display the status of the topology discovery:
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the mstdReadConfig command.
switch:admin> mstdreadconfig
*MS Topology Discovery is Enabled.
Enabling topology discovery
Use the following procedure to enable topology discovery:
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the appropriate following command based on how you want to enable discovery:
• For the local switch, enter the mstdEnable command.
• For the entire fabric, enter the mstdEnable all command.
Example of enabling discovery
switch:admin> mstdenable
Request to enable MS Topology Discovery Service in progress....
*MS Topology Discovery enabled locally.
switch:admin> mstdenable ALL
Request to enable MS Topology Discovery Service in progress....