Dell POWEREDGE M1000E - Manual (Page 335)

Fabric OS Administrator’s Guide 335
53-1002745-02
Zone object maintenance
11
You are about to expunge one configuration or member. This action could result
in removing many zoning configurations recursively. [Removing the last member
of a configuration removes the configuration.]
Do you want to expunge the member? (yes, y, no, n): [no] yes
4. Enter yes at the prompt.
5. Use cfgShow to verify the deleted zone object is no longer present.
6. If you want the change preserved when the switch reboots, use cfgSave to save it to nonvolatile
(flash) memory.
7. Use cfgEnable for the appropriate zone configuration to make the change effective.
Renaming a zone object
Use the following procedure to rename a zone object:
1. Connect to the switch and log in using an account with admin permissions.
2. Use cfgShow to view the zone configuration objects you want to rename.
switch:admin> cfgShow
Defined configuration:
cfg: USA_cfg Purple_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Purple_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
3. Use zoneObjectRename to rename zone configuration objects.
NOTE
Zone configuration names are case-sensitive, blank spaces are ignored, and the
zoneObjectRename command works in any Admin Domain except AD255.
switch:admin> zoneObjectRename "White_zone", "Purple_zone"
4. Enter the cfgShow command to verify the renamed zone object is present.
5. If you want the change preserved when the switch reboots, enter the cfgSave command to
save it to nonvolatile (flash) memory.
6. Enter the cfgEnable command for the appropriate zone configuration to make the change
effective.