Dell POWEREDGE M1000E User Manual
Page 605
Fabric OS Administrator’s Guide
605
53-1002745-02
Resource monitoring
24
You can monitor FC router resources using the fcrResourceShow command. The fcrResourceShow
command shows FCR resource limits and usage and includes the following:
•
LSAN zones and LSAN devices — The information shows the maximum versus the currently
used zones and device database entries. Each proxy or physical device constitutes an entry. If
LSAN zones are defined in two edge fabrics, they are counted as two and not one. One device
imported into multiple edge fabrics counts multiple times.
The default maximum number of LSAN zones is 3000. Refer to
on page 594 for information on changing this limit.
•
Proxy Device Slots — The physical and proxy devices use the 10,000 device slots.
The information shows the maximum pool size for translate phantom node and port WWNs and
shows the number of translate node and port WWNs from this pool.
•
Phantom Node WWNs
•
Phantom Port WWNs
•
Max proxy devices
•
Max NR_Ports
The following example shows the use of the fcrResourceShow command to display physical port
(EX_Port) resources.
switch:admin> fcrresourceshow
Daemon Limits:
Max Allowed
Currently Used
-------------------------------
LSAN Zones:
3000
28
LSAN Devices:
10000
51
Proxy Device Slots:
10000
20
WWN Pool Size
Allocated
---------------------------------
Phantom Node WWN:
8192
5413
Phantom Port WWN:
32768
16121
Port Limits:
Max proxy devices:
2000
Max NR_Ports:
1000
Currently Used(column 1: proxy, column 2: NR_Ports):
0 |
0
34
1 |
3
34
4 |
0
0
5 |
0
0
6 |
0
0
7 |
0
0
8 |
6
34
9 |
6
34
10 |
6
34
11 |
6
34
12 |
6
34
13 |
6
34
14 |
6
34
15 |
6
34
16 |
8
34
17 |
8
34
18 |
8
34
19 |
8
34