Administering advanced zoning, Zone types, Chapter 11 – Dell POWEREDGE M1000E User Manual
Page 303: Chapter 11, “administering advanced zoning
Fabric OS Administrator’s Guide
303
53-1002745-02
Chapter
11
Administering Advanced Zoning
In this chapter
•
•
•
•
•
Zone creation and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
•
•
•
•
•
Zone configuration management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336
•
•
•
Zone types
Zones enable you to partition your fabric into logical groups of devices that can access each other.
These are “regular” or “standard” zones. Unless otherwise specified, all references to zones in this
chapter refer to these regular zones. Beyond this, Fabric OS has the following types of special zones:
•
Broadcast zones
Control which devices receive broadcast frames. A broadcast zone restricts broadcast packets
to only those devices that are members of the broadcast zone. See
page 310 for more information.
•
Frame redirection zones
Re-route frames between an initiator and target through a Virtual Initiator and Virtual Target for
special processing or functionality, such as for storage virtualization or encryption. See
on page 130 for more information.
•
LSAN zones
Provide device connectivity between fabrics without merging the fabrics. See
on page 590 for more information.