ClearOne XAP400 - Manual (Page 88)

Operation ~ Utilities 82
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
To use G-Ware Switcher
1. After you have installed the versions of G-Ware you want to use into
different directories, launch G-Ware Switcher from the Windows Start menu
by selecting Programs, ClearOne G-Ware, and then G-Ware Switcher.
The G-Ware Switcher Utility window opens. G-Ware Switcher automatically
searches the PC for G-Ware software versions and displays them in the
window.
2. Select the G-Ware version you want to run.
3. If the selected G-Ware version is active (if Yes appears in the Active column
for the version you want to run), click Run to launch it.
If the selected G-Ware version is not active, click Re-Register/Make
Shortcuts to re-register the version so it becomes active. Then click Run to
launch it.
If you have installed a version of G-Ware that isn’t displayed in the G-Ware
Switcher window, click Refresh. G-Ware Switcher will locate and display the
version.
Message Log
The Message Log displays messages indicating successful or unsuccessful site
connection and all errors. This information is displayed automatically. To open the
Message Log, click the Message Log toolbar button or select Message Log from the
Tools menu.
Figure 5.18. G-Ware Switcher
Figure 5.19.
Message Log button
Figure 5.20. Message Log window