Chapter 2: installation, Hardware setup – ClearOne XAP400 User Manual

Page 15

Text mode
Original mode

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

The XAP 400 is designed for easy installation and setup. All connections are made
through rear-panel connectors. This chapter provides instructions on installing the
units and making initial connections, creating an expansion bus (E-bus) network,
assigning device ID numbers, selecting the mixer mode, and using the LCD menu.

The diagram below illustrates the typical connections that are made for a single-unit
XAP 400 system. The default routing settings in the G-Ware Matrix Screen allow
the XAP 400 to work out of the box for this type of installation.

CHAPTER 2: Installation

Figure 2.1. XAP 400 installation diagram

Hardware Setup