ClearOne XAP400 - Manual (Page 130)

124
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
HOOK - Hook Flash
This command sends a hook flash. There is no query for this command.
Command form: DEVICE HOOK
Argument details
Name Description
Device 0—7 or * to select all units
HOOK Command form
Channel See Groups and Channels, page 105
Example: #75 HOOK 1 On XAP 400 unit 5 (#75), send a HOOK flash to the
hybrid (1).
HOOKD - Hook Flash Duration
This command selects/reports the hook flash duration.
Command form: DEVICE HOOKD [Value]
Argument details
Name Description Units
Device 0—7 or * to select all units
HOOK Command form
Channel See Groups and Channels, page 105
Value 50 to 2000 ms
Null to query in text
Example: #76 HOOKD 1 500 On XAP 400 unit 6 (#76), the hook flash duration
(HOOKD) for the hybrid (1) is 500ms.
LABEL - Label
This selects/reports the label of the specific channel identified in the unit.
Command form: DEVICE LABEL [In/Out] [String]
Argument details
Name Description
Device 0—7 or * to select all units
LABEL Command form
Channel See Groups and Channels, page 105
Group I, O, M, G, P, L, E, U, W, S, C (see page 105)
In/Out 0 = Output, 1 = Input (For Expansion Bus groups only)
String String of up to 20 characters representing the label text.
Null to query and CLEAR to clear the label
Example: #77 LABEL 1 M WIRELESS On XAP 400 unit 7 (#77), the label
(LABEL) for mic (M) channel 1 is WIRELESS.