ClearOne XAP400 - Manual (Page 27)

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
G-Ware software must operate on computer equipment that meets the following
minimum requirements:
Windows 95 OSR2 64MB RAM
Windows 98 64MB RAM
Windows ME 64MB RAM
Windows NT 64MB RAM
Windows 2000 129MB RAM
Windows XP 256MB RAM
PII 200MHz or AMD Equal
1024x768 SVGA (16bit) high color
8M Video card
IE 4.0
20M HD space
RS-232 COM port
CD-ROM drive
CHAPTER 3: System
Configuration
G-Ware Requirements
ClearOne’s G-Ware software provides an easy interface for configuring and
controlling your XAP 400. While some configuration can be done using the front
panel LCD menus, G-Ware is required to complete the custom configuration of your
audio conferencing system. If you are using the default settings, no configuration is
necessary.
This chapter describes how to install G-Ware, create a site, and set up the
telco portion of your system. It also describes all configurable parameters of your
system. These descriptions are designed to be used as a guide as you make
adjustments for your particular installation. It is not necessary to configure all
parameters.