ClearOne XAP400 - Manual (Page 129)

123
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
GRATIO - Gate Ratio Adjust
This command selects/reports the setting of the gate ratio.
Command form: DEVICE GRATIO [Value]
Argument details
Name Description Units
Device 0—7 or * to select all units
GRATIO Command form
Channel 1—4 (select mic input)
Value 0 to 50 dB
Null to return current ratio
Example : #72 GRATIO 1 15 On XAP 400 unit 2 (#72), the gate ratio
(GRATIO) for mic channel 1 is set to 15dB.
GREPORT - Gate Report
This command selects/reports the gate status.
Command form: DEVICE GREPORT
Argument details
Name Description
Device 0—7 or * to select all units
GREPORT Command form
Value 0 = Off, 1 = On, 2 = Toggle
Example: #73 GREPORT 1 On XAP 400 unit 3 (#73), the gate reporting
(GREPORT) is set to on (1).
GRPSEL - Gating Group Select
This command selects/reports which gating group each input is assigned. There can
only be one selection per input.
Command form: DEVICE GRPSEL [Value]
Argument details
Name Description
Device 0—7 or * to select all units
GRPSEL Command form
Channel 1—4 (selects mic input)
Value A—D (selects gating group), Null to return current value
Example: #74 GRPSEL 1 A On XAP 400 unit 4 (#74), mic channel 1 is
assigned to gating group (GRPSEL) A.
Gate report sends a report
on every gate change. If no
mics are gated on, the
report will be sent every 10 seconds.